 |
Industrial Floor The Pavilion, Suite 612 |
|
Industrial Floor The Pavilion, Suite 612 |
POXEPLATE® EPOXY FLOORS
 |
 |
Description
POXEPLATE® is a two-component, 100% Solids EPOXY, containing no solvents, formulated with dehydrated specially graded silica to form a workable matrix that is applied over a concrete or wood floor in thickness of 1/8" to 1/4" and trowelled to a smooth or slipproof surface.
Uses
It can be used wherever the existing floor is in a worn and deteriorated condition resulting from heavy abrasive activity and/or chemical spillage.
Surface
The surface of the new epoxy flooring can be finished to meet most requirements including either a very smooth surface or one which is completely slipproof.
Base
The base to which POXEPLATE® is to be applied must be firm and dry. All concrete areas containing ruts, holes, and depressions can be grouted using POXEPLATE® EPOXY Grout. Wood floors that are loose and splintery must be repaired, and when repaired, covered with plywood prior to proceeding with the POXEPLATE® application.
Application
Concrete floors must be cleaned. All loose and deteriorated material must be removed and the entire floor prepared by scarification, shot-blasting, sanding, or acid-etching.
POXEPLATE® EPOXY Primer is applied to the prepared floor surface. POXEPLATE® EPOXY Flooring is then mixed and applied over the floor at a thickness range of 1/8" to 1/4" depending upon the anticipated activity in the area where the new flooring is to be installed.
The surface is to be trowelled to a desired finish. After POXEPLATE® EPOXY Flooring has set sufficiently, an application of POXEPLATE® EPOXY Coating may be applied to the surface in the manner necessary to provide the final finished texture by roller or trowel.
Colors
POXEPLATE® has a clear, tan appearance called Natural. It is also available in Grey or Red as standard colors. Other colors are available as special order items.
Advantages/Features
When a new topping is required for your floors, POXEPLATE® has no equal. The use of aircompressors and jack hammers commonly used for the replacement of concrete floors is totally eliminated. There is no need for excessive dirt, noise, or costly "down-time."
A completely new floor surface consisting of several thousand square feet can be completed, cured, and returned to use either during regular working hours, weekends, nights, or other off hour periods. Most major installations can be, and usually are performed during weekends with complete installation and cure accomplished within this period. The floor area would be ready for full use on Monday morning.
The cost of a POXEPLATE® EPOXY FLOOR is far less than most other types of floor installations and the qualities offered by epoxy flooring substantially exceed those offered by ordinary concrete.
POXEPLATE® applied at the standard thickness has a much greater compressive strength than concrete and will withstand fork-lift activity, heavy-abrasion, and chemical spillage. When repairs are required they are made easily and inexpensively.
Some of the features of POXEPLATE® that account for its wide acceptance are:
SANSEAM® EPOXY-QUARTZ FLOORS
Description
SANSEAM® EPOXY-QUARTZ FLOORING is a companion product of POXEPLATE®. It has been specifically designed for use in Industrial, Commercial, and Institutional applications where a decorative floor surface is required, while at the same time, containing all of the abrasion and chemical resistant qualities characteristic of POXEPLATE® EPOXY FLOORS.
It is composed of a two component, 100% Solids Epoxy containing no solvents, formulated with decorative quartz aggregate to form a workable matrix that is applied over a concrete or wood floor in thicknesses of 1/8" to 1/4" and trowelled to a smooth or slipproof surface.
Uses
SANSEAM® can be used wherever the existing floor is in a worn and deteriorated condition or where a decorative floor surface is required in offices, cafeterias, washrooms, laboratories, and other plant or institutional locations.
Surface, Base, Application
All surface, base, and application procedures are identical to those outlined for POXEPLATE® EPOXY FLOORS with the exception that the standard SANSEAM® EPOXY-QUARTZ FLOOR installation may be more commonly applied at the 1/8" thickness since usually only foot traffic and light duty activity is anticipated in locations where decorative floors are used. The surface sealer and coating may be Polyurethane instead of Epoxy, and the finished texture may be either smooth, semi-smooth, or slipproof.
Colors
SANSEAM® EPOXY-QUARTZ FLOORS are available in seven basic colors consisting of Green, Blue, Red, Grey, Buff, Brown, and White. Other special colors orders are available.
The colors can be custom designed, mixed, and blended to provide hundreds of color variations achieving a "salt and pepper" effect.
Advantages/Features
The outstanding feature of SANSEAM® is that it is possible to achieve a more decorative floor surface that is highly resistant to heavy abrasive activity and chemical spillage in the normal plant situation.
SANSEAM® Floors are completely seamless, sanitary, easy-to-clean, and maintain a permanent gloss. Installation requirements eliminate dust, noise, and costly "down-time." Large areas consisting of several thousand feet can be completed, cured, and returned to use during regular working hours or on weekends, nights, and other off-hour periods.
Most major installations can be, and usually are, performed during weekends with complete installation and cure accomplished within this period. The floor area would be ready for full use on Monday morning.
Industrial Floor Corporation
The Pavilion, Suite 612
Jenkintown, Pennsylvania 19046-3778 U.S.A.
(800) 296-1801 ; (215)886-7469 fax
E-mail us at:
INFLOOR@aol.com
Copyright © 2002 Industrial Floor Corporation.
All rights reserved
Web Hosting provided by CapitalSites